Stonetech 1 1/2 LB POLISHING POWDER

Features and Benefits
• Creates smooth, satin finish
• Eliminates etch marks & light wear patterns
• Non-acidic

Where to Use
Natural stone such as marble, limestone, travertine & terrazzo.

Directions
Read entire label before using. Use only as directed. Always test in a small inconspicuous area to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings.

1. If surface is heavily soiled, pre-clean with DuPont™ StoneTech® Professional KlenzAll™ Cleaner if needed.
2. Mask any surfaces not intended to be treated.
3. If using DuPont™ StoneTech® Professional Shining Powder following the use of Polishing Powder, ensure that the surface is well rinsed and a new pad is used.
4. Apply approximately 1/2 cup Polishing Powder plus 1 cup clean water to stone surface.
5. Refinish using a hand orbital sander or weighted floor machine at 130–140 lb,
175 rpm, fitted with a natural hair pad.
6. Keep compound wet while refinishing with plenty of water. Add Polishing Powder as needed.
7. Refinish area until desired level of polish is achieved.
8. For a highly polished finish follow with Shining Powder.
9. Rinse well and use a wet vacuum or hot water extraction unit to remove all remaining compound.

Coverage: 500-1,000 sq. ft. per pound

Download the MSDS Sheet.
Download the Specification Sheet.