Stonetech 1 1/2 LB SHINING POWDER

Features and Benefits
• Creates high shine finish
• Brings back luster of polished stone
• Non-acidic

Where to Use
Natural stone such as marble, limestone, travertine & terrazzo.

Directions
Read entire label before using. Use only as directed. Always test in a small inconspicuous area to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings.

1. If surface is heavily soiled, pre-clean with DuPont™ StoneTech® Professional KlenzAll™ Cleaner if needed.
2. Mask any surfaces not intended to be treated.
3. If using Shining Powder following the use of DuPont™ StoneTech® Professional Polishing Powder, ensure that the surface is well rinsed and a new pad is used.
4. Ensure surface is flat and smooth. Deep scratches or strong acid etching may require refinishing with DuPont™ StoneTech® Professional Honing Powder and/or Polishing Powder prior to using Shining Powder.
5. Apply approximately 1/2 cup Shining Powder plus 1 cup clean water to stone surface.
6. Refinish using a hand orbital sander or weighted floor machine at 130–140 lb,
175 rpm, fitted with a natural hair pad.
7. Keep Shining Powder wet with water while refinishing. Add Shining Powder as needed.
8. Refinish area until desired level of shine is achieved.
9. Rinse well and use wet vacuum or hot water extraction unit to remove all remaining Shining Powder.
Coverage: 500-1,000 sq. ft. per pound
Download the MSDS Sheet.
Download the Specification Sheet.