OIL STAIN REMOVER Features and Benefits • Pulls out deep, set-in oil stains • Leaves no residue • Will not discolor stone • Easy to use Where to Use Natural stone such as marble, granite, limestone, travertine, slate & sandstone. Grout for ceramic & porcelain tile. Masonry & concrete. Directions Read entire label before using. Use only as directed. Al...
[read more]
OIL STAIN REMOVER
Features and Benefits
• Pulls out deep, set-in oil stains
• Leaves no residue
• Will not discolor stone
• Easy to use
Where to Use
Natural stone such as marble, granite, limestone, travertine, slate & sandstone. Grout for ceramic & porcelain tile. Masonry & concrete.
Directions
Read entire label before using. Use only as directed. Always test in a small inconspicuous area to determine that the desired results will be achieved. Make sure surface is clean, dry, and free of waxes and coatings. Ensure that area is well-ventilated and keep children and pets away from the area during application and until surface is clean and dry.
1. Using a plastic or wood spatula, stir thoroughly to mix the paste.
2. Apply a 1/4” thick layer of paste to the stain. Ensure that the paste extends at least 1–2” beyond the edge of the stain.
3. Do not cover.
4. Allow 48–72 hours for paste to completely dry to a powder.
5. Remove powder and discard.
6. Allow solvent to completely dry from the stone.
7. If stain is not completely gone after drying, repeat process.
8. Clean up residue and tools with mineral spirits.
9. Reseal cleaned area.
Coverage: Pint Can: ½-1 sq. ft. of surface at 1/4" thickness.
Download the MSDS Sheet.
Download the Specification Sheet.
; "Stonetech OIL STAIN REMOVER")
Hover over image to zoom 
Stonetech
OIL STAIN REMOVER
