Stonetech RESTORE ACIDIC CLEANER

RESTORE ACIDIC CLEANER

Features and Benefits
• Renews tile & grout
• Cleans away hard water deposits, grout haze, efflorescence & soap scum
• Professional strength, acidic formula

Where to Use
Ceramic tile, porcelain tile & grout, granite, slate & sandstone.

Directions
Read entire label before using. Use only as directed. Test in small inconspicuous area to determine required dilution and results. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Heavy duty dilution may darken some surfaces. This acid-based cleaner will etch or damage most marble, limestone and travertine surfaces. Will etch or corrode most metal surfaces. Avoid skin and eye contact. Wear protective eyewear, gloves, long sleeves, and long pants while handling product. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area during application and drying.

Dilute concentrated cleaner with warm water according to the following mixing chart:

1. Apply mixed solution with a clean mop, towel, sponge or sprayer. Avoid applying cleaner on unintended surfaces.
2. Lightly rub with a scrub brush or floor machine as needed.
3. Remove solution using a sponge, wet/dry vacuum or damp mop.
4. Rinse area well with clean water and wipe dry. Thoroughly rinse all metal surfaces with clean water.
5. Reseal cleaned area with a DuPont™ StoneTech® Professional sealer.
Coverage:  Gallon Concentrate: 2,000-8,000 sq. ft.
Download the MSDS Sheet.
Download the Specification Sheet.